Casting foundry High Temp Cast Iron Smelter high velocity all fuel burner
Burns any fuel or any oil including propane , stop spending hundreds on propane or worrying about losing pressure in your tanks. Melt cast Iron in just 8 minutes. Made for smelting cast iron and other hard to melt metals extremely fast , melts cast iron in with ease and glass. Foundry temps of 2,800 deg have bin recorded and carbon steel was melted on one occasion but took hours however steel. And cast iron are not the same, we have melted cast iron in seconds after preheating forge for 1/2 hour. Device also lays flat if needed. Stainless steel 304 Industrial grade Waste oil burner. Burns all fuels even gases like propane and natural gas at high performance levels. Able to run a high velocity flame >2400 thermal couple temp, a open propane flame from a good torch is only 1900 to 2000 deg. Extremely adjustable flame for lean and rich combustion processes. Device is easy to clean when waste oil is used as the fuel source.
Device self cleans at high temps or lean burn flames. This model has a air line pre heater that heats the air and the fuel to over 300 deg F allowing Glass melting and other high temp foundry or kiln operations. Also comes in horizontal design.
I have bin designing and testing waste oil burners and exotic Combustion system for industrial processes for 10 years and you will be impressed with the different these nozzles can make to your industrial process. Waste oil > 50kw , depends on viscosity or fuel tank position. Uses siphon nozzle , no oil or fuel pump required. See this device in action here. >>> See device in action.
The item "Casting foundry High Temp Cast Iron Smelter high velocity all fuel burner" is in sale since Sunday, September 1, 2019. This item is in the category "Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing". The seller is "forgeburner" and is located in Mechanicsburg, Illinois. This item can be shipped worldwide.
- Modified Item: No
- Country/Region of Manufacture: United States
- Brand: NOBOX7