ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS

ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS

ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS
L4; 1.8L; Gas(B18B1). L4; 1.8L; Gas(B18C1). Type R; L4; 1.8L; Gas(B18C5). VTEC; L4; 1.6L; Gas(B16A3). Non-VTEC; L4; 1.6L; Gas(B16A3).

L4; 2.0L; Gas(B20B4; B20Z2). DOHC, SI; L4; 1.6L; Gas(B16A2). However, once the package gets picked up from our location, we have NO control on how long the carrier takes to deliver the item, at times the terminals can be congested and take up 1-2 day delays. Q: WHAT COMPONENTS ARE INCLUDED WITH AN ACTION CLUTCH KIT? A: Action Clutch kits come complete with all components necessary to install the clutch.

Components include pressure plate, clutch disk, throw-out bearing, and alignment tool. High quality Japanese pilot bearings are also included in applications that call for such component. Q: IS FLYWHEEL RESURFACING NECESSARY BEFORE INSTALLING A NEW CLUTCH? A: A smooth, flat flywheel surface is essential for proper clutch operation. Flywheels are subject to heat, scoring, and warping during use.

We highly recommend that the flywheel be resurfaced by a reputable automotive machine shop whenever a clutch kit is installed. Resurfacing should be done on a flywheel-grinding machine only. If your flywheel shows any signs of cracking, replace it.

Never roughen the flywheel clutch surface with sanding as this reduces clutch life. The surfaces are designed to rub against each other (producing friction), not tear into each other. Q: DO ACTION CLUTCHES REQUIRE A BREAK IN PERIOD. A: Yes, all Action Clutches must undergo a break in process of moderate stop and go driving. We recommend a break in period of 250 miles for organic, 500 for puck discs and 1000 miles for Kevlar discs.

Q: WILL AN ACTION CLUTCH INCREASE PEDAL EFFORT? A: Action pressure plates are specifically designed to handle high torque applications. With increased clamping force and torque capacity, comes increased pedal pressure. The "1 Series" single diaphragm pressure plates increase pedal pressure vs. The "2 Series" dual diaphragm pressure plates increase pedal pressure vs. Q: CAN AN ACTION CLUTCH PUCK STYLE DISC BE USED FOR DAILY DRIVING? A: Puck style discs are very aggressive and offer a no nonsense performance action. The engagement of a puck style disc will be much more aggressive and longevity of the disc is considerably less than a full face disc.

The puck style discs are intended for racing applications, but can also be used on street driven vehicles. As a customer you must decide on the trade off between daily driven comfort and performance gains. The item "ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS" is in sale since Tuesday, March 13, 2018.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts". The seller is "goldrush-performance" and is located in West Covina, California.

This item can be shipped worldwide.


ACTION STAGE 3 CLUTCH KIT for ALL B SERIES MOTORS INTEGRA CIVIC SI HYDRO TRANS