A+++ Got it sooner than expected. Easy to use for older machines (cnc). Add USB FLASH memory to all Fanuc CNC Machines, connects to RS232 BETTER THAN a floppy emulator, your floppy remains installed. ShopLink FLASH is NOT LIMITED to 720K or 1.44MB file sizes like a floppy emulator , our largest file is " 2 GB ". Incredibly easy to use with unlimited FREE technical assistance.
Everything is included, "Shoplink Flash 2.0" box, 30 CNC cable, 12VDC power. "ShopLink FLASH" easy data transfer for CNC controls. CNC Program Transfer Device, this is what you have been looking for. Need USB on your CNC for a FLASH memory drive? Easy, inexpensive and works perfectly.
Missing a com port on your new PC, try "DNC in a box". Drip feed, aka DNC\TAPE mode, to DynaPath 20\30, Fanuc, Fadal, Haas, Yasnac MX2\3 and other CNC's. If you are drip feeding with a PC, ShopLink FLASH will work better.
Use this small hand held device to connect to your CNC's RS232 port and transfer. ShopLink FLASH lets your CNC receive (READ) or save (PUNCH) files directly. To a USB Flash drive via RS232. Load NC files into your CNC memory OR drip feed files.
Up to 2 Gigabytes long (using the CNC's DNC or Drip\Spoon feed capability). A USB READER FOR CNC, FILE TRANSFER FOR CNC. Program Transfer between USB & CNC, CNC Program Transfer Device. NOT enough memory in your FANUC? Does your FANUC only have 128K, 256K, 1 OR 2 megabytes of physical memory?
ShopLink FLASH gives you the ability to DNC DRIP FEED a. A TAPE\REMOTE a file up to 2 gigabytes (2000 megabytes) WOW!!! NOTE : ShopLink FLASH can send and receive files through your Fanuc serial port in and out of memory.
ShopLink FLASH can also DNC a. A TAPE mode a file up to 2giga bytes long through your Fanuc serial port.HOWEVER, not all Fanuc controls have the TAPE mode option. NOTE : insure your CNC has the ability to "TAPE" mode from the serial port. Most Fanuc 3, Fanuc 6 and Fanuc 0 do not have this function unless it was added as an option. It is your responsibility to determine the.
"TAPE" mode function is active on your CNC and how to set the parameters to use it. NOTE: Foreign buyers, power supply is 100-240VAC 50\60hz with US style AC plug. This product is compatible with Haas\Fanuc\Yasnac etc. MAZAK USB, USB FOR MAZAK, FLASH MEMORY FOR MAZAK, works through RS232 port.
Works on Mazak CNC's also, BUT ONLY EIA\GCODE files. 14 day return on Factory defects. The item "Fanuc USB FLASH memory upgrade for all Fanuc CNC Machines, connects to RS232" is in sale since Thursday, June 16, 2016. This item is in the category "Computers/Tablets & Networking\Drives, Storage & Blank Media\Floppy, Zip & Jaz Drives". The seller is "williag1" and is located in Daytona Beach, Florida.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam, Uruguay.